West Coast Hot Rod Association / Classifieds / Car Parts For Sale

SBF Race Engine

Deborah-WFO — Fri, 07 Mar 2008 17:26:33 GMT

444 SBF Winsor- Virgin Dart Race Block with Billet Caps, Cleveland Mains, New Eagle H-Beams 6.200 long with ARP 2000 Bolts, New Eagle Crank 4.100 stroke. Crank prepared by Mile High Crank- Index ground, cross drill was plugged, and crank was re-heat treated. JE gas port dish pistons coated by Embee, JE Wrist Pins, Virgin AFR Heads w/ 1 thou longer stainless valves. New King Rod and Main Brgs

Call Kelly-WFO 602 435 8080

wtb 351w SVO OR DART BLOCK

kwikrob — Tue, 12 Aug 2008 21:21:16 GMT

351W 9.5" deck with 4 bolt mains and bore range from 4-4.125". Also looking for other internals. Let me know what you have, pictures, condition and price. Thanks. CALL OR EMAIL 510-305-7199

Reasonable West Coast Body & Paint

West Coast Auto Craft — Tue, 12 Aug 2008 09:39:47 GMT

Hi all, we are new to the forum. Check us out at www.westcoastautocraft.com .

86 dodge charger roller,great index car

mopar racer — Fri, 01 Aug 2008 11:40:39 GMT

CAR HAS TO GO.DARE TO BE DIFFERENT.lost my storage spot.THIS IS A 86 DODGE CHARGER TUBE CHASIS,CERT TO 8.50 ,8/31/06.IF YOU WANT TO CERT CAR TO 7.50,ALL THE CAR NEEDS IS FUNNY CAR CAGE AND X BAR UNDER CHASIS. car is for 5`10'/180 pound guy or smaller.CAR DRIVES STRAIT,IF IT WASNT FOR TRANS BRAKE BUTTON ON STEERING WHEEL,YOU WOULDNT NEED TO HOLD ON.CAR LEAVES STRAIT,LIKE PRO STOCK WITH WHEELS ABOUT 3 TO INCHES IN THE AIR.VERY FUN AND SMOOTH CAR TO DRIVE.CAR IS ALL STEEL ,EXCEPT HOOD.STILL HAS DOOR LOCKS AND LIFT UP REAR HATCH ,THE FRONT END CLIP IS REMOVIABLE.REMOVABLE TRANS TUNNEL.4 LINK DANA WITH 4.88 4 WHEEL DISK BRAKES.HAS A ARM FRONT SUSPENSIOn.LINE LOCK,AIR SHIFTER.ALL OF ALUMINUM INTERIOR IS PAINTED ,EVEN ENGINE COMPARTMENT.CAR IS AWSOME AND EASY TO DRIVE.YOU CAN RUN BB MOPAR OR SB CHEVY,HAVE ALL MOTOR AND MID PLATES AND HEADERS FOR BOTH MOTORS.EVERYTHING BOLTS RIGHT IN SAME LOCATION.JUST AD YOUR MOTOR and trans.i have drive shaft for powerglide and 727 trans. YOU CANT BUILD THIS CAR FOR what im asking.WHEELIE BARS,DONT NEED THEM,BUT ADDED THEM FOR SAFETY REASONS.CAR 60FT 1.23 AND HAS GONE 5.70@121 IN THE 1/8. HAD THIS CAR 3 YEARS,IVE ONLY MADE 15 PASSES. CAR WENT 9.00@152. please be seriouse only 6500.00 .email me at mopar890@yahoo.com THANX DAVE

3103516242

15x8 weld prostars with 275/60 DR only have 7 passes on them

robsquezn — Sun, 15 Jun 2008 20:06:12 GMT

have 2 15x8 4 1/2 BS weld pro stars only have like 7 passes on them
with M/T 275/60/15 drag radials only have 7 passes on them to paid
778.00+ for them ill let them go for $500.00 cash firm chevy bolt patern

robsquezn@sbcglobal.net (916)743-2606

Holeshot double beadlock wheels

nonstick — Tue, 10 Jun 2008 07:58:55 GMT

Holeshot stars 15 x 12 with champion double beadlock and 2 7/8 backspacing. $900. Or buy the fronts with the rears for $300 more. The fronts are 15 x 4 with 2 7/8 backspacing.

KILGORE TH400 2.75 LOW GEAR SET

harry k@HK Motorsports Dyno Shop — Thu, 08 May 2008 22:30:07 GMT

listing is for Kilgore Turbo 400 2.75 ratio low gear set ,rebuildeble lifetime warranteed from Kilgore if it breaks ,not the copy cat/weak 2004R sets sold by some aftermarket vendors . could be used for street or strip .

few passes only !

asking $500 OBO
818 908-1746 IN VAN NUYS CA.91401

1986 S-10 Blazer for sale

BiggMike — Mon, 05 May 2008 18:17:17 GMT

Like I said NO MOTOR or TRANS. Set up for Nitrous and a Powerglide. To much to list email me and I will send phone number to provide information. ALl steele and glass custom paint. $7500.00 OBO

1970 ProMod/Top Sportsman CHEVELLE

Steven B (QMD) — Fri, 04 Apr 2008 16:24:40 GMT

Jerry Haas 25.1 E chassis with upgrades certified 2/09, fiberglass and carbon fiber body, Lamb struts, Koni Dbl Adj electronic rear shocks, Haas fabricated rear end with 3^rd member, Mark Williams 40 spline gun drilled axles, floaters and driveline, Trick titanium can, Coldfire on board fire system, custom fabricated fuel, dry sump and puke tanks, Weld Star beadlocks, new Goodyear tires, BAE and Chevy motor plates and headers (PSCA headers) 16 volt battery with charger, Stroud chutes with spring launchers

$53,000.00 OBO Contact Scott at (916) 532-3725 or Email bai1dog@aol.com

[IMG]http://i136.photobucket.com/albums/q171/mtbfreerider_photos/posted%20on%20internet/6.jpg[/IMG]

[IMG]http://i136.photobucket.com/albums/q171/mtbfreerider_photos/posted%20on%20internet/5.jpg[/IMG]

[IMG]http://i136.photobucket.com/albums/q171/mtbfreerider_photos/posted%20on%20internet/4.jpg[/IMG]

[IMG]http://i136.photobucket.com/albums/q171/mtbfreerider_photos/posted%20on%20internet/3.jpg[/IMG]

[IMG]http://i136.photobucket.com/albums/q171/mtbfreerider_photos/posted%20on%20internet/2.jpg[/IMG]

[IMG]http://i136.photobucket.com/albums/q171/mtbfreerider_photos/posted%20on%20internet/1.jpg[/IMG]

Want To Buy

bluestreak — Sun, 23 Mar 2008 12:44:44 GMT

Any one have leads to jeico parts,I have older"winston cup"case

jerico told me good luck:I need 26 spline input shaft GM stile.

WTB - BBC headers for a Fox body

Henry D — Wed, 19 Mar 2008 17:22:45 GMT

Please e-mail price and images to dlssystem@gmail.com.

Thanks,
H

Sheet metal intakes

Paul PWS — Sun, 16 Mar 2008 21:25:47 GMT

18 degree sbc, 15 degree sbc, big cheif if your looking give me a call. Paul 661-864-1632

Championship Winning 406 SBC

Webb7775 — Fri, 14 Mar 2008 20:47:22 GMT

Basko Racing Engines 406 SBC

Dart little M block

AFR 220 Heads with Nextec Springs and Manley Valves

Edelbrock Super Victor intake

Scat Rotating Assembly with JE Pistons

Crowler Lifters with Smith Bros. 116 wall moly pushrods

Comp Steel Rockers with Stud Girdle

BG Holley 750 carb.

CSR Water pump

MSD billet distributor and crank trigger

This motor is race ready and priced to sell

$7500.00

Weber Motorsports

WCHRA Open 1/ D-Gas 1

Phone 602-770-7483

Reher & Morrison 522

Webb7775 — Fri, 14 Mar 2008 07:38:30 GMT

Price reduced to $9000

Reher-Morrison Signature Series Brodix heads W/ Manley stainless valves
Reher-Morrison custom CNC machined valvetrain stablizer
Reher-Morrison White Powdercoated die cast aluminum valve covers
upgraded Carrillo steel rods
Crowler lifters
custom chromemoly push rods
new JE 14:1 pistons
new Custom Comp Cam
new Gary Williams 1050 Dominator w/ 1 inch Moroso spacer
MSD Billet Distributor
port matched Edelbrock Victor intake
Scat Steel Crank
Moroso Oil pump and pan
ATI super dampener
Manley double roller timing set
new Reher-Morrison spiral core plug wires

Brian Weber

WCHRAOpen Comp1/ D-gas1

602-770-7483

28' Haulmark Elite Enclosed Trailer

RHolder — Mon, 10 Mar 2008 13:15:56 GMT

28' Haulmark Elite enclosed triple axle, cabinets, air conditioner, air compressor, generator, pit pal, tool box, winch, pit lighting, nitrous bottle storage. Can see in Fontana this weekend.
$11,500.00.

28' TPD Enclosed Trailer

RHolder — Mon, 10 Mar 2008 13:14:27 GMT

2001 28' TPD enclosed trailer triple axle, generator, pit lighting, overhead cabinets, workbench with cabinets and built in tool box, pit pal door organizer, inside mounted spare tire & rack. Good shape have pics.
Can bring to Fontana this weekend.
$10,000.00

ARC overhead switch panel w/nitrous

Nitrousrat — Mon, 10 Mar 2008 10:06:19 GMT

Brand new Auto Rod Controls overhead switch panel w/nitrous $150 obo

email- Nitrousrat1@yahoo.com

Thanks, Dave

Kirky Seat w/Cover

Nitrousrat — Mon, 10 Mar 2008 10:05:03 GMT

Kirky seat with cover $110 obo

email- Nitrousrat1@yahoo.com

Thanks, Dave

62-65 Nova Fiberglass Hood & Bumper

Nitrousrat — Mon, 10 Mar 2008 10:03:56 GMT

62-65 Chevy II Harwood 6" Cowl Hood used one race like new $275 obo.

62-65 Chevy II Harwood Front Bumper used one race like new $125 obo

email- Nitrousrat1@yahoo.com

Thanks, Dave

BBF parts and Misc.

admin — Thu, 06 Mar 2008 21:28:38 GMT

Alum. rad. 31x20 polished for Ford $300
MSD billet dist. (8477) for BBF $250
Sanden SD508 polished 134a a/c comp.$250
Big End BBF mini starter $200
CSR BBF elec water pump w/backplate $300
Flex-a-lite (295) dual 13.5 puller $400
Holley (9380-1) 850 ann. carb $500
Holley (80670) Street Avenger 670 $300
March BBF serp conversion (30260) $700
Hooker BBC 1-7/8 chevy II headers $50
All new minus headers.........
Call for info 1-760-677-9078

BELT DRIVES,WATER PUMPS,STARTERS,FLEXPLATES.

admin — Thu, 06 Mar 2008 21:27:56 GMT

TCWPERF
TCWPERFORMANCE/DANNY BEE RACING
WE MANUFACTURE FORD & CHEVY CAM SHAFT BELT DRIVE SYSTEMS,ALSO WE ARE A WHAREHOUSE DISTRIBUTOR FOR MEZIERE AND OTHER PRODUCTS.WE HAVE A NEW WEB SITE THAT IS UNDER CONSTRUCTION WITH UPDATES DAILY.CALL FOR SPECIAL PRICING.

[url]TCWPERFORMANCE.COM[/url]
[url]DANNYBEERACING.COM[/url]

2/29/2008 6:43:49 PM
jwall
Info only.
The hyperlink in your profile has a space at the end. When you click on the link you will not be able to find the website. If you remove the space you will be good.

Additional, typing in all caps is yelling, you have great products no need to yell.
edited by jwall on 2/29/2008